The Base Module is the
foundation of your ToolBOX … it is the workhorse of your system. Use
it for detailing the miscellaneous day-to-day items on your jobs, and for
adding “gingerbread” to CVSpro beams and columns.
·Installs
the COREsetup programs for all modules
·Over 115
different programs
·Huge
HELP system and extensive manuals
·FREE
Lifetime technical support
The Base Module includes the following
programs:
·DRAW STEEL
SHAPES: draw & dim any view of any steel shape at any bevel to scale
·NEW! ROOF
FRAMES: details 3 frame types with stripped end seats or carrier angle
seats.
·4 SIDED
FRAMES: draws any 4 sided frame using channel, angle, bars, or TS
·NEW! ADD
POUR STOPS: add angle or bent plate pour stops to previously detailed
beams. Add to top or bottom flanges. Will draw top view and or section
view. Automatically dimensions main and section views.
·NEW! ADD
LINTEL PLATES: add lintel plates to previously detailed beams. Add to top
or bottom flanges. Will draw top view and or section view. Automatically
dimensions main and section views.
·NEW! JOBS
PROGRAM: helps organize your jobs into job folders
·WELD
SYMBOLS: Shows slide of last weld symbol you drew. You can change weld if
required and then draw new weld symbol on drawing. Will place multiple
arrow heads on single symbol.
·WELD LOADS:
Calculates inches of weld or load for any size fillet weld.
·SHOPBILL
PROGRAM: for filling out shop bill - can be configured to any shop bill
layout. Will put text in correct place in shopbill even when you are
zoomed up on detail.
·BILL OUT
MATERIAL SIZE: Writes material size along with piecemark on detail.
·ASSEMBLY
MARKS: Puts assembly marks on drawing.
·SHIPPING
MARKS (choice of 2 styles): Puts shipping marks on drawing.
·MISC. CLIP
ANGLES: Draws any size angles with holes any direction.
·DRAW PLAIN
ANGLES: Draws any size, length, any direction.
·DRAW PLAIN
PLATES: Draws any size and dimensions.
·PLAN
VIEW OF PLATE: Draws plan view with 1, 2, or 4 hole pattern.
·PLATE
ELEVATION: Draws side view with dimensions to holes
·ADD COLUMN
STIFFENER plates in existing column details
·ADD COLUMN
SAFETY CLIPS to column details
·DRAW SHEAR
PLATES: Draws any type misc. shear bar with two views & all dimensions.
·DRAW
SECTIONS thru bent plates and add holes if required.
·BOLT
COUNTS: Puts quantity+ type, and calculates length from "grip" thickness.
Will total bolts on sheet and put them in a table.
·DRAW BOLT
CIRCLE: Draws a bolt circle on a round or rectangular plate with
dimensions.
·DRAW
EXPANSION BOLT: Draws expansion bolts and bills out size.
·ANCHOR
BOLT: Draws 4 types of anchor bolts and bills out size.
·ANCHOR BOLT
DETAILS: Draws 4 different type of anchor bolt detail for shop.
·STUD
PROGRAM: Draws any size and length in any direction.
·ADD
NOTCH OR BLOCK: Modifies existing beam or plate and add dims for a notch
or block.
·SECTION
ARROWS: Puts section arrow and letter any direction.
·MISC. STUB
DIMINSIONS: Calculates & draws stub dimensions to any point, on any angle,
and will move existing stubs to new position.
·DRAW
SLOTS: Draws any size, length, on any angle.
·DRAW ROUND
HOLES: Draws round hole by picking intersection on lines.
·DRAW FLANGE
HOLES: Draws any size flange hole in any thickness of material.
·ADD HOLES
TO EXISTING DETAILS: Add holes to plates, beams or columns.
·DRAW EDGE
DISTANCE: Locate and draw from any point.
·CREATE ANY
TYPE OF FORM: example: Shop bills, lintel/window schedules, material
lists, deck lists, etc.
·
TIMER PROGRAM: Will print date and total elapsed time stamp on drawing.
·TIME SHEET
PROGRAM: Will keep records of all time spent on any drawings on hard disk
for review later.
·CONVERSION
PROGRAMS: D/M/S to Dec Deg. D/M/S to bevel, Dec. Deg. to bevel.
·TRIM
MULTI LINES: Will trim multi-lines using crossing.
·EXTEND
MULTI LINES: Will extend multi-lines using crossing.
·ENLARGE ANY
TEXT TO READ WITHOUT ZOOMING IN.
·CHANGE
ITEMS: to another layer by picking items you want changed.
·SLOPING
LINE: Draw line on any "bevel" in any direction.
·CHANGE PART
or all of text string.
·CHANGE
DIMENSION: Pick dim. To change and enter new dimension.
·MODIFY
EXISTING TEXT HEIGHT OR STYLE: By window or crossing.
·SHAPE INFO:
Built in AISC database for ‘detailer’ dimensions.
·DIVIDE
LINE: Will divide up existing line by no of spaces or dim. draws all text
for spacing. (Ex. 4 spcs @ 2'0" = 8'-0") Will space out & draw studs,
holes, and bolt heads at the divide points.
·CUT SECTION
WITH SHEET # .: Cuts sections with sheet no. is arrow for erection
drawings.
·SHIMS:
draws "horse shoe" shims, any size and no. of slots.
·CALCULATE
AND DRAW CAMBER DIAGRAMS for trusses or beams
·CALCULATE
AND DRAW ANY ARC LINE that you choose and dimensioned.
·
CLOUD PROGRAM: Will draw a cloud or starburst around items.
·GRID
BUBBLES: Will draw a bubble for misc. grid line marks.
·SET CROSS
HAIRS to any angle by picking time. (Also reset back to 0)
·DRAW ANY
BOX around any entity with 2 different line types.
·CALCULATE
LENGTH OF SLOPING STIFFNERS in beams or columns.
·DRAW ARCS
AND CALCULATE AND DIMENSION ALL LINES
·SUPER ADD
PROGRAM: Add, subtract, multiply, divide dimensions by picking from
drawing by "window" or "crossing"
·BLOW UP
DETAIL: "Window" an area to create a "blow up detail” of it.
·TEXT ON
ARC. Will print text on an arc line.
·MULTIPLE
LEADER LINES: Multiple arrow point locations with 1 text line.
·BREAK
MULTIPLE LINES: Break lines by "crossing" (humps optional)
·BREAK LINE
WITH "HUMP": Break line and draw "hump" over other lines.
·DRAWS
curved leader lines.
·CONVERT
Imperial to Metric -or- Metric to Imperial dimensions.
·MOVE
"MIRRORED" DIMS TO OTHER SIDE OF LINE.
·FIND A
FILE: Will find any file that is in the ACAD path.
·
AUTOMATICALLY sets widths for POLYLINE for drawing very heavy lines.
·ODD ANGLE
TRIANGLE: Calculates angle offset points with bracing WP’s on opp. sides
·CONVERSION
programs for changing SDS/2 and CVSpro drawing into ToolBOX format
